Our most popular material used for most any Banner application. Excellent adhesion qualities for vinyl lettering. Available in most popular colors.
Heavy Duty Double-Sided with BLOCK-OUT 18oz.
For those EXTREME over the street banner applications. For Single or Double Sided applications. Heavy reinforcement for long lasting durability. The front side is smoother than the back side. Available in white only.
White Banners will finish out to a full 24”, 36” and 48” give or take a half inch since factory roll width, sewing and
finishing is not an exact science. Colors will finish out to 23”, 34” and 48” utilizing available 61” rolls.
Please note: Exact “Finished Size” banners are made upon request, but we will need to use a wider roll of banner material to accomplish this. The cost of your banner will be calculated to the next highest size for Exact Finished Size Banners.
Cut Material Only
We cut the material of your choice to the specified size. We offer clear tabs in place of grommets for cut material banners. Please see the Clear Tabs section below.
Hems and Grommets
We fold our banners over 1” to sew a double stitch on all four sides. Then we place #2 brass grommets every 2 to 3 feet, depending on the size of the banner.
Hems, Ropes, & Grommets
We fold our banners over 1” to sew a double stitch on all four sides, with a rope sewn into the hem on each corner. Then we place #2 brass grommets every 2 to 3 feet, depending on the size of the banner.
We hem two parallel sides, then fold the adjacent two sides over to make a pocket you can slide a pole or rod into. We can orient the pole pockets either across the top and bottom, or down both sides. You can select the diameter of the pocket to accomodate different sized poles that may be used to hang the banner.
Clear tabs are available as an extra for unfinished, cut material banners. They are made of high strength composite film, and are stronger than grommets. Clear Tabs are less conspicuous than grommets and blend into the banner substrate for a more pleasing visual effect. Crystal clear for full-color digital banners.
Reinforced corners are made of banner material that is cut into a triangle and added to each of the corners of the banner on the backside. The corners provide extra strength for the banner.
– Made of high strength composite film, Clear Tabs are stronger than grommets.
– Clear Tabs are less conspicuous than grommets and blend into the banner substrate for a more pleasing visual effect.